Kontron MSM800BEV - Manual (Page 38)

MSM800BEV / Connectors & Jumpers
www.kontron.com 36
Notes: denotes power or ground signals.
The KEY pins are to guarantee proper module installation. PinA1 will be removed and the female side
plugged for 5.0V I/O signals and PinD30 will be modified in the same manner for 3.3V I/O. It is
recommended that both KEY pins (A1 and D30) be electrically connected to GND for shielding.
KCC boards have them as NC (not connected).
Signals used Onboard (not for external use):
IRQ3, IRQ4 COM1 /2
IRQ5 Sound
IRQ7 LPT1
IRQ6 FD
IRQ14 HD
IRQ12 PS/2 Mouse
IRQ13 Coprocessor
TC FD
DACK2 and DRQ2 FD
5.1.20 X102 PC/104 BUS Interface
Pin A: B: C: D:
0 Ground Ground
1 IOCHCK Ground SBHE MEMCS16
2 SD7 RESET LA23 IOCS16
3 SD6 +5Volt LA22 IRQ10
4 SD5 IRQ9 LA21 IRQ11
5 SD4 NC LA20 IRQ12
6 SD3 DRQ2 LA19 IRQ15
7 SD2 (-12Volt) LA18 IRQ14
8 SD1 0WS LA17 DACK0
9 SD0 +12Volt MEMR DRQ0
10 IOCHRDY Ground NC MEMW DACK5
11 AEN SMEMW SD8 DRQ5
12 SA19 SMEMR SD9 DACK6
13 SA18 SIOW SD10 DRQ6
14 SA17 SIOR SD11 DACK7
15 SA16 DACK3 SD12 DRQ7
16 SA15 DRQ3 SD13 +5Volt
17 SA14 DACK1 SD14 MASTER
18 SA13 DRQ1 SD15 Ground
19 SA12 REF Ground Ground
20 SA11 SYSCLK
21 SA10 IRQ7
22 SA9 IRQ6
23 SA8 IRQ5
24 SA7 IRQ4
25 SA6 IRQ3
26 SA5 DACK2
27 SA4 TC
28 SA3 ALE
29 SA2 +5Volt
30 SA1 OSC
31 SA0 Ground
32 Ground Ground