2 jumpers, Jumpers – Kontron MSMGE104EX User Manual
Page 19
MSMGE104EX
/ MSMGE104EX Connectors & Jumpers
www.kontron.com
17
5.2 Jumpers
The Jumpers for the USB0 and USB1 circuit on this product:
Default settings in bold!
Jumper
Structure
1-2 / Open
2-3 / Closed
J5
USB1
Disable
Enable
J6
USB0
Disable
Enable
Attention
There are only two USB ports on the PCIe bus.
If different PCI/104-Express boards with additional USB ports are being used, then the board which will
have the USB ports available must be selected.
Jumpers J5 (USB1) and J6 (USB0) enable or disable the two ports; if they are closed, the USB ports are
enabled. Open these jumpers if the two USB ports are already used on another PCI/104-Express board.
It is also possible to enable one USB port on each board but be careful that USB0 is enabled on one
board and USB1 on the other board!
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)