Kontron AM4150 - Manual (Page 20)

Introduction AM4150
Page 1 - 4 ID 1051-5040, Rev. 2.0
1.2 Board-Specific Information
Due to the outstanding features of the AM4150, such as superior processing power and flexible
interconnect topologies, this AMC board provides a highly scalable solution not only for a wide
range of telecom and data network applications, but also for several highly integrated industrial
environment applications with solid mechanical interfacing.
Some of the AM4150's outstanding features are:
• Support for the following processors:
• Freescale™ QorIQ™ P5020 processor, 2.0 GHz, 800 MHz platform frequency
• Freescale™ QorIQ™ P5020 processor, 1.6 GHz, 600 MHz platform frequency
• Up to 8 GB DDR3 SDRAM memory with ECC running at up to 1300 MHz
• AMC interconnection:
• Common Options Region: up to two Gigabit Ethernet SerDes interfaces and up to two
SATA ports
• Fat Pipes Region: 8 lanes configurable for PCI Express, Serial RapidIO, and Gigabit
Ethernet SerDes connections
• Extended Options Region: serial port, debug port, two GPIs (on request), two GPOs (on
request)
• Bidirectional PCI Express reference clock (FCLKA)
• Full hot swap support
• Up to 2 GB NAND flash memory via a NAND flash controller integrated in the processor
• One serial port on front I/O (RS-232)
• Up to two Gigabit Ethernet ports on front I/O
• Up to 64 GB NAND flash memory via an optional SATA Flash module
• Two SPI boot flashes for two separate U-Boot bootloader images:
• One standard SPI boot flash
• One recovery SPI boot flash
• One 8 MB SPI flash for operating system use
• Dedicated IPMI Module Management Controller (MMC) with external MMC firmware flash
• Watchdog timer
• Multiple interfaces for debugging and manufacturing purposes
• Four bicolor User-Specific LEDs (providing debugging information, etc.)
• One onboard DIP switch (for selecting the SPI boot flashes, overwriting E-Keying, etc.)
• microSDHC socket
• Standard temperature range: -5°C to + 55°C
• Passive heat sink solution for forced airflow cooling
• Single Mid-size AMC module
• Denx U-Boot bootloader
• Designed to be compliant with the following specifications:
• PICMG® AMC.0 R2.0, Advanced Mezzanine Card Specification
• PICMG® AMC.1 R2.0, PCI Express™ on AdvancedMC™
• PICMG® AMC.2 R1.0, Ethernet Advanced Mezzanine Card Specification
• PICMG® AMC.4 R1.0, Serial RapidIO on AdvancedMC™ Specification
• PICMG® MTCA.0 R1.0 Micro Telecommunications Computing Architecture Base
Specification
• IPMI - Intelligent Platform Management Interface Specification, v2.0, R1.0