Kontron AM4120 IPMI Firmware - Manual (Page 18)

Functional Description AM4120 IPMI Firmware
Page 12 ID 1045-9586, Rev. 1.0
2.2.2 AdvancedTCA and AMC Commands
The following table shows an excerpt from the command lists specified in the PICMG 3.0 R 2.0
AdvancedTCA Base Specification and the PICMG AMC.0 Advanced Mezzanine Card Specifi-
cation, R 1.0. The shaded table cells indicate commands supported by the AM4120 MMC.
M = mandatory, O = optional
Table 4:
AdvancedTCA and AMC Commands
COMMAND
PICMG 3.0
SPEC.
TABLE
NETFN CMD
KONTRON
SUPPORT
ON MMC
AdvancedTCA M
Get PICMG Properties 3-9 PICMG 00h M / Yes
Get Address Info 3-8 PICMG 01h N/A
Get Shelf Address Info 3-13 PICMG 02h N/A
Set Shelf Address Info 3-14 PICMG 03h[1] N/A
FRU Control 3-22 PICMG 04h M / Yes [1]
Get FRU LED Properties 3-24 PICMG 05h M / Yes
Get LED Color Capabilities 3-25 PICMG 06h M / Yes
Set FRU LED State 3-26 PICMG 07h M / Yes
Get FRU LED State 3-27 PICMG 08h M / Yes
Set IPMB State 3-51 PICMG 09h N/A
Set FRU Activation Policy 3-17 PICMG 0Ah N/A
Get FRU Activation Policy 3-18 PICMG 0Bh N/A
Set FRU Activation 3-16 PICMG 0Ch N/A
Get Device Locator Record ID 3-29 PICMG 0Dh M / Yes
Set Port State 3-41 PICMG 0Eh N/A
Get Port State 3-42 PICMG 0Fh N/A
Compute Power Properties 3-60 PICMG 10h N/A
Set Power Level 3-62 PICMG 11h N/A
Get Power Level 3-61 PICMG 12h N/A
Renegotiate Power 3-66 PICMG 13h N/A
Get Fan Speed Properties 3-63 PICMG 14h N/A