1 ipmb-l link sensor, 2 module hot swap – Kontron AM4301 User Manual
Page 20
8
www.kontron.com
X
Exceed critical threshold
*
Power On/Off
-
Power On
N
No change
**
The lower limits are not asserted; only the upper limits (non-critical, critical and non-
recoverable) are asserted for temperature sensors.
2.4.2.1
IPMB-L Link Sensor
The AM4301 has an IPMB-L links to communicate with the AMC Carrier and other chassis devices on the
chassis IPMB-0 bus. MMC monitors the bus for any link failure and send the bus failure event to the AMC
Carrier upon the recovery occurs.
2.4.2.2
Module Hot Swap
The hot-swap event message conveys the current state of the module, the previous state, and a cause of the
state change as can be determined by the MMC. Refer to AMC.0 R1.0 Specifications for further details on the
module hot-swap state.
PexLaneGood 5
PCIE lane 5 detection
-
N
PexLaneGood 6
PCIE lane 6 detection
-
N
PexLaneGood 7
PCIE lane 7 detection
-
N
PexLaneGood 8
PCIE lane 8 detection
-
N
PexLaneGood 9
PCIE lane 9 detection
-
N
PexLaneGood A
PCIE lane 10 detection
-
N
PexLaneGood B
PCIE lane 11 detection
-
N
PexLaneGood C
PCIE lane 12 detection
-
N
PexLaneGood D
PCIE lane 13 detection
-
N
PexLaneGood E
PCIE lane 14 detection
-
N
PexLaneGood F
PCIE lane 15 detection
-
N
Health Error
Board health sensors (aggregation of other sensors)
*
Asserted /
Desserted
MMC Reboot
IPMC reboot detection
*
N
Ver change
IPMC firmware upgrade detection
*
N
Sensor Name
Voltage/Signals Monitored
Scanning Enabled
under Power
State
Health LED
(Green to Red)