3 board specifications, Table 1-1 board specifications – Kontron AM4510 User Manual
Page 14
2
www.kontron.com
1.3
Board Specifications
Table 1-1:Board Specifications
* Designed to meet or exceed
Features
Description
Compliancy
•
AMC.0 R2.0
•
AMC.3 R1.0
OS Compatibility
•
RedHat Linux Enterprise 4
IPMI Features
•
Management Controller compliant to PICMG 3.0, AMC.0 R2.0 and IPMI v1.5 rev 1.1.
•
Management Controller is run time field reprogrammable without payload impact.
•
Robust fail safe reprogramming implementation (which includes two firmware images) that
could perform automatic or manual rollback if a problem occurs during critical reprogramming
phase.
•
Remote upgrade capability from IPMI interface (via IPMB-L).
•
Management Controller self test which can detect failure under its code integrity and trig an
automatic rollback.
Supervisory
•
Hardware system monitor through IPMI (voltages, currents, temperature), temperature
monitor / alarm; board temperature sensor, power failure.
Mechanical
•
Single-width Full-Size (181.5 x 75 x 30.16 mm) or mid-size (181.5 x 75 x 18.96 mm)
Power Requirements
•
Management power is less than 100mA peak at 3.3V
•
Payload power is drive dependant
Environmental
Temperature*
•
Operating: 0-70°C/32-158°F
•
Storage and Transit: -40 to +70°C/-40 to 158°F
Environmental
Humidity*
•
Operating: 15% to 90% @55°C/131°F non-condensing
•
Storage and Transit: 5% to 95% @ 40°C/104°F non-condensing
Environmental Altitude*
•
Operating: 4,000 m / 13,123 ft
•
Storage and Transit: 15,000 m / 49,212 ft
Environmental Shock*
•
Operating: 30G, half-sine 11ms, each axis
•
Storage and Transit: Bellcore GR-63-CORE Section 4.3
Environmental
Vibration*
•
Operating: 1.0G, 5-500Hz each axis
•
Storage and Transit: 0.5G, 5-50Hz; 3.0G, 50-500Hz each axis
Safety / EMC
Meet or exceed:
•
Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1
•
EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
Warranty
•
Two years limited warranty