5kab-adapt-lvdstottl, 1 jili30 connector, Display cable guide – Kontron KTD-S0018-A User Manual
Page 12
KTD-S0018-A Page
10
KAB-ADAPT-LVDStoTTL
Display Cable Guide
5
KAB-ADAPT-LVDStoTTL
The adapter has two connectors – one counter part of the JILI30 SBC connector and one for the KAB-
FLEX32 cable.
5.1
JILI30 Connector
The JILI30 interface of the KAB-ADAPT-LVDStoTTL uses only 3 LVDS data pairs so that only 18 bit displays
can be driven. The following table shows the pinout.
Header
Pin
Signal Name
Function
1
FTX0-
First channel data 0 input (negative)
2
FTX0+
First channel data 0 input (positive)
3
FTX1-
First channel data 1 input (negative)
4
FTX1+
First channel data 1 input (positive)
5
FTX2-
First channel data 2 input (negative)
6
FTX2+
First channel data 2 input (positive)
7
GND
Ground
8
FTXC-
First channel clock input (negative)
9
FTXC+
First channel clock input (positive)
10 - 13
N. C.
Not connected
14
GND
Ground
15 - 16
N. C.
Not connected
17
GND
Ground
18 - 23
N. C.
Not connected
24
GND
Ground
25
N. C.
Not connected
26
DATAENA
Designator badly chosen - means:
Panel power enable (power sequencing)
27
N. C.
Not connected
1
30
28 - 30
VCC
1)
Power +5.0V