Kontron KTD-00735 ADD2-CRT - Manual (Page 7)

ADD2-CRT
KTD-00735-C Public User Manual Date: 2009-05-18 Page 7 of 7
Installation Guide
Connect 821516 CRT Bracket cable to the ADD2-CRTcard
Plug in the ADD2-CRT card to the PCIe-x16 slot (nearest CPU)
Fix the ADD2-DVI card by bracket etc (not included)
Boot and enter BIOS
For the 986LCD-M BIOS 986LCD18 or above:
Select Chipset > North Bridge Configuration > Video Function Configuration >
Boot Type = [CRT+CRT2]
SDVO = [CRT]
For the KT965 BIOS KT965009 or above:
Select Chipset > North Bridge Configuration > Video Function Configuration >
Boot Type = [CRT+CRT2]
Select Exit menu.
Hint: Using also Secure CMOS = [Enabled] will make sure that Windows will not change Boot Type in BIOS.
Save Changes and Exit.
Boot into OS and load Intel Graphics Media Driver. For Windows install version 6.14.10.4859
(win2K_xp1431.exe) or newer.
Select output to Monitor 2 (or another configuration as requested).
Electrical Specification
Power consumption:
The +5V available on the CRT connector can deliver minimum 55mA continuously and 1A peak. The output
is protected by thermal shutdown circuit.
3.3V 0.8W max.
12V 0.5W max.
Operating temperature: 0-60ºC