Kontron KTD-00735 ADD2-CRT - Manual (Page 5)

ADD2-CRT
KTD-00735-C Public User Manual Date: 2009-05-18 Page 5 of 7
Measures in mm
MB PCB
39.5
42.4
96.4
MB PCI-Expressx16
CRT pin row J3
ADD2-CRT
Introduction
• Output Analogue RGB generated by three 10-bit video DAC’s
• Output to HDDB15 standard CRT RGB connector via pin-row connector and cable kit (821516)
• 821516 CRT Bracket cable is included
• PCB is prepared for optional onboard HDDB15 connector
• Input is SDVO via ADD2 interface (Intel multiplexed dual SDVO and PCIex16 interface)
• The SDVO is high-speed serial DVO (1G~2Gbps) at clock rates up to 165Mpixels/s
• Complete Windows driver support
• Panel resolution up to 1600x1200 (frame rate 60 Hz)
• Monitor Detection supported through Hot Plug
The ADD2-CRT card is based on the Chrontel CH7317A Analogue RGB transmitter. The ADD2-CRT
supports resolutions up to 1600x1200 at 60 Hz frame rate. The card is designed for the PCI-Expressx16
connector which on the 986LCD-M family of motherboards and on the KT965/Flex motherboard is
multiplexed PCI-Expressx16 and SDVO. When the ADD2-DVI card is plugged into the PCI-Expressx16
connector then the motherboard automatically detects the card and select SDVO output.
Mechanical Drawing
The ADD2-CRT includes CRT Bracket cable (item no. 821516), see picture below.