Kontron RTM8050 - Manual (Page 14)

Product Description
1 RTM8050
www.kontron.com
1. Product Description
1.1 Product Overview
The RTM8050 is a single slot (6HP) AdvancedTCA Rear Transition Module. This RTM provides additional
connectivity to the AT8050 CPU front board.
1.2 What’s Included
This board is shipped with the following items:
• One RTM8050 board
• One RTMHDD board with SAS hard disk
• One CD-ROM containing documentations and drivers.
• Cables that have been ordered
If any item is missing or damaged, contact the supplier.
1.3 Board Specifications
Table 1-1:Board Specifications
Features Description
Compatible Products • AT8050
Compliancy
• PICMG3.0 R3.0 (see note in section 1.4)
• SAS1R10
• SFF-8470
• IEEE 802.3z (fiber interface)
• IEEE 802.3 (copper interface)
• PICMG HPM.1
• USB 2.0
IPMI Features
• Management Controller compliant to PICMG 3.0 and IPMI v2.0 .
• Management Controller is run time field reprogrammable without payload impact.
• Robust fail safe reprogramming implementation (which includes two firmware images) that
could perform automatic or manual rollback if a problem occurs during critical reprogramming
phase.
• Remote upgrade capability (via IPMB).
• Management Controller self test which can detect failure under its code integrity and trig an
automatic rollback.
Supervisory
• Hardware system monitor through IPMI (voltages, currents, temperature), temperature monitor
/ alarm; board temperature sensor, power failure.