Kontron CP6925 - Manual (Page 24)

Page 1 - 10 Doc.ID: 35008, Rev 1.0
Introduction CP6925
CUSTOMER SPECIFIC
P R E L I M A R Y
1.5 Technical Specifications
Table 1-2: Main Specifications
TYPE SPECIFICATIONS
Controller Broadcom® BCM5396, 16-port Gigabit Ethernet Switch with integrated SerDes/
SGMII interfacing, operates in unmanaged mode, layer 2
Ethernet 14 channels of fabric three speed Ethernet: 10/100/1000 Mbit/s
2 channels of Gigabit Ethernet, routed to the front panel
Ethernet Interfaces Two CPCI backplane connectors: J3 and J5, fabric PICMG 2.16
One dual RJ45 front panel connector for uplink interfacing
LEDs 16, paired status LEDs, two per channel, integrated in the front panel, green
activity LED, yellow and green speed LED
Speed Configuration Auto-negotiation for speed and switching
Plug & Play Design No jumpers to be configured
Power Supply
Voltage 5 volt via backplane connector, J1
Power Consumption Source: 5 V: consumption: 21 watts (max.)
Temperature Range Operational: 0ºC to +55ºC Standard
-40ºC to +85ºC E2 (on request)
Storage: -20ºC to +60ºC Standard
-40ºC to +85ºC E2 (on request)
Climatic Humidity 93% relative humidity at 40°C, non-condensing
Dimensions 160 mm L x 233 mm W (dual height Eurocard)
Board Weight ca. 276 g