Kontron CPS3003-SA - Manual (Page 16)

D R A F T — F O R I N
T E R N A L U S E O N L Y
16 www.kontron.com
User Guide
CPS3003-SA
Int
er
faces
USB Up to 13 USB ports:
» 6 x USB 2.0 on the CompactPCI Serial interface
» 2 x USB 3.0 / 2.0 on the CompactPCI Serial interface
» 2 x USB 2.0 ports on the front I/O
» 1 x USB 2.0 port on the rear I/O interface
» 1 x USB 3.0 / 2.0 port on the rear I/O interface
» 1 x USB 3.0 / 2.0 port on the CPS3003-EXTIO/CPS3003-BRIDGE extension
module
Serial Two 16C550-compatible UARTs:
» COMA available on the CPS3003-EXTIO/CPS3003-BRIDGE extension module or
on rear I/O
» COMB or GPIO available on the rear I/O only
SATA Six SATA ports:
» 2 x SATA 3 Gb/s onboard
» 2 x SATA 6 Gb/s on the CompactPCI Serial interface
» 2 x SATA 3 Gb/s on the CompactPCI Serial interface
High-performance RAID 0/1/5/10 functionality on all SATA ports
I/O Extension
Interfaces I/O extension to 8 HP board version via the CPS3003-EXTIO module:
» CFast (SATA 3 Gb/s)
» USB 3.0
» COMA (RS-232)
» Reset button
» SATA activity LED
I/O extension to 9 HP board version via the CPS3003-BRIDGE module:
» CFast (SATA 3 Gb/s)
» USB 3.0
» COMA (RS-232)
» Reset button
» SATA activity LED
» CompactPCI interface
I/O extension of CPS3003-SA via the Smart Extension Module:
» SATA 3 Gb/s
» USB 2.0
» When installed 4HP width is exceeded
Sock
et
s
Front Panel Connectors DP: two DisplayPort connectors, J7 and J8
USB: two 4-pin, type A connectors, J9 and J10
Ethernet: dual RJ-45 connector, J11A/B
Onboard Connectors » CompactPCI Serial connectors P1 to P6
» 18-pin extension connector for the SATA flash module (SSD), J16
» Two 204-pin DDR3 SODIMM sockets
» 60-pin, high-speed I/O extension connector
Table 1: CPS3003-SA Main Specifications (Continued)
FEATURES SPECIFICATIONS