Kontron CPS3003-SA - Manual (Page 13)

D R A F T — F O R I N
T E R N A L U S E O N L Y
13 www.kontron.com
User Guide
CPS3003-SA
1.3.2 Front Panel
Figure 2: 4 HP CPS3003-SA Front Panel
Note: For information regarding the front panel of the 8 HP CPS3003-SA with a CPS3003-EXTIO
extension module, refer to Chapter 6.
For information regarding the front panel of the 9 HP CPS3003-SA with a CPS3003-BRIDGE
extension module, refer to Chapter 7.
CPS3003
DP-B
HS
TH
WD DP-A
0
1
2
3
USB
SPEED
ACT
SPEED
ACT
System Status LEDs
HS (blue): Hot Swap Status
TH (red/green): Temperature Status
WD (green): Watchdog Status
General Purpose LEDs
LED3..0 (red/green/red+green): General Purpose / POST Code
Note: If the General Purpose LEDs 3..0 are lit red during boot-up,
a failure is indicated before the uEFI BIOS has started.
Integral Ethernet LEDs
ACT (green): Ethernet Link/Activity
SPEED (orange): 1000BASE-T Ethernet Speed
SPEED (green): 100BASE-TX Ethernet Speed
SPEED (off) + ACT on: 10BASE-T Ethernet Speed