Kontron CPS3101 - Manual (Page 8)

D R A F T — F O R I N
T E R N A L U S E O N L Y
8 www.kontron.com
User Guide
CPS3101
1.3 Technical Specif ication
Table 1: CPS3101 Main Specifications
FEATURES SPECIFICATIONS
Onboard Inte
rf
aces
USB One USB 3.0 interface on type A connector, J8
SATA One SATA 6 Gb/s interface on standard SATA connector, J7, for connecting a SATA
2.5” HDD/SSD
CompactPCI Serial CompactPCI Serial interface on connector P1:
» Compliant with PICMG® CPCI-S.0 R 1.0 CompactPCI® Serial Specification
» Support for the following interfaces:
» 1 x SATA 6 Gb/s
» 1 x USB 3.0
» SGPIO
One optional CompactPCI Serial connector P6 for increased mechanical stability
Hot Sw
ap
Hot Swap Hot swap handle with integrated hot swap switch for shutting down the power sup-
plies in order to safely remove the CPS3101 from the system
LEDs
Front Panel LEDs SATA LEDs:
» Act (green): Activity of the HDD/SSD
» Fail (red): Failure Status of the HDD/SSD
» Loc (yellow): Locates the HDD/SSD in a RAID array
Power Status LEDs:
» Pwr (green): Power Status of the CPS3101
Gener
al
Mechanical 3U, 4 HP, CompactPCI Serial-compliant form factor
Power Consumption approx. 0.6 W (without hard disk or USB device connected)
Power Supply +12V DC in accordance with the CompactPCI® Serial Specification
Temperature Range Operational: 0°C to +60°C Standard
-40°C to +85°C Extended
Storage: -40°C to +85°C Without hard disk
Climatic Humidity 93% RH at 40 °C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 100 mm x 160 mm
Board Weight 135 grams