Just Better Zeppelin 2-valve Brass and Aluminum Manifol - Manual (Page 2)

1 MR-601 Handwheel & Screw
2 U1-4A 1/4" Intake
3 MR-520 Sight Glass
4 MR-505 Piston w/Seat &
O-Rings
5 MR-606 Stem & Nut
6 MR-601 Handwheel & Screw
7 MR-503 Handwheel Screws
(2)
8 MR-509 O-Ring (2)
9 M2-102N Hanging Hook
1
9
2
8
3
4 5
7
6
Technical service: 800-323-0811
E-Mail: [email protected]
Web Site: www.jbind.com
TM
DEEP VACUUM PUMPS
Featuring
Heavy Duty,
High Performance
1/2 HP, 60 Cyc Motor
DV-42N 1.5 CFM
DV-85N 3 CFM
DV-142N 5 CFM
DV-200N 7 CFM
DV-285N 10 CFM
Also Available With
Dual Voltage Motors
NO.
REF. PART NO. DESCRIPTION
REPAIR PARTS
See your wholesaler
for a complete line of
gauges
2006 JB Industries Inc.
LIMITED WARRANTY
INSTRUCTIONS PARTS LIST
NO.
REF. PART NO. DESCRIPTION
Each gauge is individually tested and calibrated prior
to shipment. Due to its sensitivity, the gauge may
need to be "zeroed in" prior to usage.
Adjusting Gauge Recal to Zero
1. Remove lens.
2. Turn recal screw slightly in the opposite direc-
tion that pointer is to be moved. Maximum recal
screw adjustment is 1/2 turn. Over adjustment will
permanently destroy calibration.
3. Replace lens.
Turn recal screw
clockwise. Pointer turns
counter-clockwise.
Turn recal screw coun-
terclockwise. Pointer
turns clockwise.
Gauges are sensitive instruments.
Over adjustment and/or being subjected to pressures
over dial range are not covered under warranty terms.
CHARGING AND TESTING
2-Valve
Brass/Aluminum
Manifold
With Free
Floating,
Double O-Ring ,
Piston Seal ,
TM