Just Better LD-2500 Hunter Leak Detector - Manual (Page 2)

Declaration of Conformity
This is to certify that this equipment, designed by JB Industries 601 N.
Farnsworth Ave., Aurora, IL 60505 USA meets the essential safety re-
quirements of the European Union and is placed on the market according-
ly. It has been constructed in accordance with good engineering practice
in safety matters in force in the Community and does not endanger the
safety of persons, domestic animals or property when properly installed
and maintained and used in applications for which it was made.
Equipment Description: LD-2500 HUNTER refrigerant leak detector
Applicable Directives: 73/23/EEC as amended by 93/68/EEC
89/336/EEC as amended by 93/68/EEC
2002/95/EC (RoHS)
Applicable Standards: EN 61010-1: 1993 EN55011, Group 1, Class
A: 1991 EN50082-1: 1992
CE Implementation Date: March 1, 1997
Authorized Representative: Dave Madden
Director, Engineering
JB Industries
Any questions relative to this declaration or to the safety of JB’s products
should be directed, in writing to the quality assurance department at the
above address.
WARNING
This symbol is intended to alert the user to the presence of important operation
and maintenance (servicing) instructions in the literature accompanying the
instrument.
Specifi cations
Usage: Indoor and Outdoor
Minimum. Sensitivity to R22, 0.25 oz/yr (high sensitivity)
R134a, R404A, R410A:
2.0 oz/yr (low sensitivity)
Operating Temperature Range: +32° to 122° F (0° C to +50° C)*
Storage Temperature Range:
+14° F to +140° F (-10° C to +60° C)
Humidity: 95% RH NC Max.
Altitude: 6500’ (2000 m)
Power Supply: Two “D” Cell Alkaline Batteries
Battery Life: Approximately 16 hours
Pollution Degree: 2
Overvoltage Category: 2
Weight (with power cells): 1.28 lb. (0.58 kg)
*may be operated for a limited time in lower temperature environments.