Jeep 2015 Wrangler - User Guide - Manual (Page 23)

Rear Head Restraints — 2 Door Model
The rear seat head restraints are not adjustable. They can be removed to make it
easier to take out the rear seat. To remove the head restraint, press the button on each
of the two head restraint guides and pull upward on the head restraint. Replace the
head restraint before driving the vehicle with passengers in the rear seat. To replace
the head restraint, insert the head restraint rods into the guides and push downward
on the head restraint until locked.
WARNING!
Do not drive the vehicle without head restraints while passengers are occupying
the rear seat. In a collision, people riding in these areas are more likely to be
seriously injured or killed.
Rear Head Restraints — 4 Door Model
The rear seat is equipped with nonadjustable head restraints.
FRONT SEATS
Manual Seat Adjustment
Forward/Rearward
• Lift up on the adjusting bar located at
the front of the seat near the floor and
release it when the seat is at the de-
sired position. Then, using body pres-
sure, move forward and backward on
the seat to be sure that the seat adjust-
ers have latched.
Adjusting Bar Location
GETTING STARTED
21