beautypg.com

Station presets, Change a channel or frequency – Ram Trucks UCONNECT 430 for Chrysler User Manual

Page 27

background image

To receive satellite radio, the vehicle needs to be outside

with a clear view to the sky. If the screen shows Acquir-

ing Signal, you might have to change the vehicle position

to receive a signal. In most cases, the satellite radio does

not receive a signal in underground parking garages or

tunnels.

Station Presets

There are 12 station presets available for storing the radio

stations in each tuner range.
To store the desired station, press and hold one of the

station PRESET buttons for two seconds and you will see

the highlighted button change from green to beige. You

will also see the radio station stored in the highlighted

button and you will hear a confirmation beep when the

station is saved. Pressing the PRESET buttons in SAT

mode changes the information shown in the list between

the Channel Name, name of the Artist currently playing

on the channel and name of the Song currently playing

on the channel.

Change A Channel Or Frequency

Press the “Seek/Tune” down arrow button

to quickly

seek down to the next available station or channel.

26 Uconnect® MULTIMEDIA (RADIO)