Ram Trucks UCONNECT 430 for Chrysler - Manual (Page 20)

3. Press the “Set Time Zone” button to change to the
desired time zone.
4. Press the “Daylight Savings” button to switch Day-
light Savings on or off.
SET THE TIME — Uconnect® 430N
1. Press the “Time Display” button in the lower left
corner of the screen.
The time is automatically set by the GPS system for the
time zone selected. The radio default is GPS time
where the vehicle time is automatically set by the GPS
system. If the vehicle is not able to receive the GPS
signals, the vehicle time is only updated when the GPS
satellite signals are being received (which requires the
vehicle to be outside with a clear view to the sky).
2. It is possible to set the time manually (ahead or behind
actual GPS time), by pressing the “USER TIME”
button.
4
GETTING STARTED 19