Jeep 2012 Grand Cherokee SRT - User Guide - Manual (Page 23)

Power Lumbar
• Push the switch forward to
increase the lumbar support. Push
the switch rearward to decrease
the lumbar support.
• Pushing upward or downward on
the switch will raise and lower the
position of the support.
Memory Seat
• The memory seat feature allows
you to save two different driver
seating positions (excluding
lumbar position), driver's outside
mirror, tilt/telescoping steering
column position, and radio station
preset settings. The memory seat
buttons are located on the driver's
door panel.
• Adjust all memory profile settings,
press the SET button then press 1
or 2 within five seconds.
• To program a Key Fob to the memory position, place the ignition switch
in the LOCK position and remove the Key Fob, press and release the
LOCK button on the Key Fob to be programmed within 5 seconds of
pressing button 1 or 2.
• Place the ignition switch in the ON/RUN position, select Remote Linked
to Memory in the Electronic Vehicle Information Center (EVIC) and enter
Yes.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the
programmed Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
GETTING STARTED
21