Jeep 2012 Grand Cherokee SRT - User Guide - Manual (Page 107)

4. For the front axle, place the jack on the body flange just behind the
front tire as indicated by the triangular lift point symbol on the sill
molding. Do not raise the vehicle until you are sure the jack is fully
engaged.
5. For a rear tire, place the jack in
the slot on the rear tie-down
bracket, just forward of the rear
tire (as indicated by the
triangular lift point symbol on the
sill molding). Do not raise the
vehicle until you are sure the
jack is fully engaged.
WHAT TO DO IN EMERGENCIES
105