Bulb replacement, Head light – Jeep 2007 Liberty User Manual
Page 362

Exterior Lights
Bulb Type
Front Side Marker . . . . . . . . . . . . . . . . . . . . . . . . 168
Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . 9007QL
Rear License Plate Light. . . . . . . . . . . . . . . . . . . . 168
Rear Stop/Tail Lights . . . . . . . . . . . . . . . 3157 P27/7W
Rear Turn Signal Lights (2) . . . . . . . . . 3757 APY27/7W
NOTE:
Numbers refer to commercial bulb types that
can be purchased from your authorized dealer.
If a bulb needs to be replaced, visit your authorized
dealer.
BULB REPLACEMENT
Head Light
1. Open the hood.
2. Reach behind the headlamp unit in the engine com-
partment to access the headlamp bulb lock ring.
3. Firmly grasp the lock ring on the back of the headlamp
unit housing.
4. Rotate the lock ring on the back of the headlamp
housing counter-clockwise to unlock it.
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean
the bulb with rubbing alcohol.
5. Disconnect the electrical connector and replace the
bulb.
362
MAINTAINING YOUR VEHICLE