Jeep 2006 Liberty User Manual

Page 27

Transmitter Battery Service
The recommended replacement battery is the Panasonic
CR2032 or equivalent.

1. Pry the transmitter halves apart with a dime or similar
object. Make sure not to damage the rubber gasket
material during removal.

2. Remove and replace the batteries. Avoid touching the
new batteries with your fingers. Skin oils may cause
battery deterioration. If you touch the battery, clean it
with rubbing alcohol.

3. Reassemble the transmitter case. Snap the halves
together and test transmitter operation.

SECURITY ALARM SYSTEM — IF EQUIPPED
This system monitors the vehicle doors, swing gate,
swing gate flip-up window, and ignition for unautho-
rized operation. When the alarm is activated, the system
provides both audible and visual signals. The horn,
headlights, and tail lights will sound/flash repeatedly for
three minutes. If disturbance is still present (driver’s
door, passenger door, other doors, ignition) after three
minutes, the headlights and tail lights will flash for an
additional 15 minutes.

Separating Transmitter

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE