Jeep 2006 Liberty User Manual

Page 26

2. Enter Program Mode: Turn the ignition to the ON
position, and using a currently programmed transmitter;
press and hold the

ЉUnlockЉ button on the transmitter.

Continue to hold the “Unlock” button, wait at least 4 but
no longer than 10 seconds, then press and hold the
PANIC button for at least 1 second. Release both buttons
simultaneously.

3. Program Each Transmitter: All transmitters to be used
with your vehicle must be programmed as follows:

Press and release the

ЉLockЉ and ЉUnlockЉ buttons simul-

taneously, followed by a press and release of ANY button
on each transmitter to be programmed. You will hear a
chime when a transmitter has been successfully pro-
grammed.

General Information
This transmitter complies with FCC rules part 15 and
with RSS-210 of Industry Canada. Operation is subject to
the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference that may be
received, including interference that may cause undes-
ired operation.

If your Remote Keyless Entry fails to operate from a
normal distance, check for these two conditions:

1. Weak batteries in transmitter. The expected life of
batteries is from one to two years

2. Closeness to a radio transmitter such as a radio station
tower, airport transmitter, and some mobile or CB radios.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE