ISSPRO R8865 - Manual

ISSPRO, INC. 2515 N.E. Riverside Way, Portland OR 97211
Telephone: (503) 288-4488  Toll Free: (800) 888-8065
FAX: (503) 249-2999
ISSPRO R8865 DIGITAL HOURMETER INSTRUCTIONS
Pin
1: “+” Battery 1 2 Pin 2: “-” Ground
(Not Switched) ISSPRO INC.
R8865 HOURMETER
Pin 4: (Not Used) 4 3 Pin 3: “+” Signal Input. Switched voltage
to enable Elapsed Time Function.
To Display: When power is applied to pins 1 and 2, the electronics and the display are activated. At this
point, elapsed time is NOT being accumulated.
To Operate: When power is applied to pin 3, elapsed time is being accumulated. This is indicated by
the flashing of the hourglass icon. The hourmeter is usually activated by the ignition switch or an oil
pressure switch.
Form IS132 (Rev. B 8/8/02) Page 1 of 1
ISSPRO, INC. 2515 N.E. Riverside Way, Portland OR 97211
Telephone: (503) 288-4488  Toll Free: (800) 888-8065
FAX: (503) 249-2999
ISSPRO R8865 DIGITAL HOURMETER INSTRUCTIONS
Pin
1: “+” Battery 1 2 Pin 2: “-” Ground
(Not Switched) ISSPRO INC.
R8865 HOURMETER
Pin 4: (Not Used) 4 3 Pin 3: “+” Signal Input. Switched voltage
to enable Elapsed Time Function.
To Display: When power is applied to pins 1 and 2, the electronics and the display are activated. At this
point, elapsed time is NOT being accumulated.
To Operate: When power is applied to pin 3, elapsed time is being accumulated. This is indicated by
the flashing of the hourglass icon. The hourmeter is usually activated by the ignition switch or an oil
pressure switch.
Form IS132 (Rev. B 8/8/02) Page 1 of 1