Hybrid Racing WaveTrac LSD - Manual (Page 2)

2
Install Guide
STEP 1:
Remove the (3) ball spring de-
tents using a 12mm socket. The-
se are what keeps the transmis-
sion in gear after you've shifted.
Handle these with care as they
tend to fall apart when removed.
Reassembly Tips: Reinstall balls,
springs, and bolts. Torque to 16 ft
-lb (22 N-m).
STEP 2:
Remove the backup light switch
using a 27mm socket.
Reassem-
bly Tips: Apply Honda Bond to
the threads before reinstalling.
Torque to 22 ft-lb (29 N-m).
Unbolt (using a 12mm socket)
and Remove the vehicle speed
sensor and its o-ring. You may
have to twist the speed sensor
back and forth a bit to get it
loose.
Reassembly Tips: Torque
the 12mm bolt to 16 ft-lb (22 N-
m).
STEP 3A:
Remove the interlock bolt using a
7mm allen wrench.
Reassembly
Tips: Apply Honda Bond to the
threads and torque to 29 ft-lb (39
N-m).