Home Legend Laminate and Cork Hard Surface Reducers - Manual (Page 3)

Doc.ID: 079 Effective: 4/17/2013
Title: Installation Laminate and Cork Stair Nose Rev.:2
Laminate and Cork Stair Noses
The stair nose trim piece covers the front edge of the stair tread. The stair tread is usually covered with the
same floor covering as the connecting floor. The result is stairway which coordinates with the rest of the floor
in the house.
Step 1.
Attach the U-track to the stair nose. Position the U-track/stair-nose on
the tread. Mark on the stair tread where the U-track will be installed.
Step 2.
Fasten the U-track to the tread with a ¼ X 1” flat head screws. The
screw holes should already been predrilled.
Step 3.
Cut the floor planks so it will cover the stair tread from the riser to the
edge of the track.
Step 4.
Apply beads of heavy duty construction glue or flooring adhesive on
the tread where the flooring will be installed.