Gastroback 42407 Design Toaster Advanced - Manual (Page 9)

3. Press the TOAST/STOPP button and the bread will automatically be lowered and cen-
tred in the slot (picture A). The TOAST/STOPP button illuminates red.
4. Press the CRUMPET button. The power indicator
of the button illuminates blue (picture D).
The toasting process is automatically controlled. Shortly before the toasting process is finished
the power indicator of the TOAST/STOPP button will start blinking. When the selected
browning level is reached, the toaster switches off automatically, and the power indicator of
the TOAST/STOPP button and the EINSEITIG TOASTEN button eliminates.
Care and Cleaning
WARNING: Always switch off the toaster (using the TOAST/STOPP button), unplug the
power cord and allow the toaster to cool down, before removing the crumb tray or
cleaning or moving the toaster. Do not immerse or place the toaster or power cord in
any liquids or drip any liquids on the toaster to avoid risk of electric shock and damage.
Do not place the appliance or any part of it in an automatic dishwasher.
Do not use abrasive cleaners, cleaning pads or any hard and sharp objects (i.e. metal
scouring pads) for cleaning. Clean the toaster and power cord with a damped sponge
or tissue and carefully dry the appliance after cleaning. Do not handle the appliance or
any part of it with violence. Do not insert any foreign objects into the slots.
1. Switch off the toaster, pressing the TOAST/STOPP button, unplug the power connector
and allow the toaster to cool down.
2. Pull out the crumb tray and empty the crumb tray.
You may clean the crumb tray and rolls tray in warm dish-water. Thoroughly dry the trays
after cleaning and leave the trays dry naturally for some minutes.
3. Grasp the toaster on both sides and hold the toaster over a sink or large bowl and
turn it upside down. Carefully shake the crumbs out of the toaster while turning the toaster
in all directions.
4. Wipe the exterior of the toaster with a damp soft cloth. Take care not to spill or drip
water or any other liquids in the toaster. If necessary, clean the power cord in the same
way. Then thoroughly dry the toaster and power cord with a dry soft cloth.
5. Insert the crumb tray in the bottom of the toaster.
CAUTION: Do not insert the crumb tray, when it is still wet or damp.
21
D
42407_DesignToasterAdvancedAutomatik_Manual.qxp 14.05.2007 14:06 Seite 21