Gastroback 42407 Design Toaster Advanced - Manual (Page 8)

• If one of the function buttons (AUFTAUEN, AUFWÄRMEN, or EINSEITIG TOASTEN)
was pressed, the toaster switches back to normal operation automatically after the function
program has finished.
The defrost function - AUFTAUEN
The defrost function enhances the toasting time for toasting frozen bread.
1. Insert the frozen bread slices in the slots and select the desired browning.
2. Press the TOAST/STOPP button and the bread will automatically be lowered and centred
in the slot. The TOAST/STOPP button illuminates red.
3. Press the AUFTAUEN button. The power indicator
of the button illuminates blue (picture B).
The toasting process is automatically controlled. Shortly before the toasting process is finished
the power indicator of the TOAST/STOPP button will start blinking. When the selected
browning level is reached, the toaster switches off automatically, and the power indicator of
the TOAST/STOPP button and the AUFTAUEN button eliminates.
The reheat function - AUFWÄRMEN
The reheat function shortens the toasting time for crisping up toast.
1. Insert the bread slices in the slots.
2. Press the TOAST/STOPP button and the bread will automatically be lowered and cen-
tred in the slot. The TOAST/STOPP button illuminates red.
3. Press the AUFWÄRMEN button. The power
indicator of the button illuminates blue (picture C).
The toasting process is automatically controlled. Shortly before the toasting process is finished
the power indicator of the TOAST/STOPP button will start blinking. When the selected
browning level is reached, the toaster switches off automatically, and the power indicator of
the TOAST/STOPP button and the AUFWÄRMEN button eliminates.
The one side toasting function - EINSEITIG TOASTEN
The one side toasting function activates additional heating power for the heating elements
in the centre strip. Use the EINSEITIG TOASTEN function for crisping up halved rolls,
with the soft inner side of the sliced rolls facing to the centre strip of the toaster.
ATTENTION: The heating elements in the centre get very hot. Ensure not to burn the toast and
use browning control level 1 or 2 only.
1. Use a sharp knife to cut the rolls in halves and remove crumbs. Important: ensure,
that the halves are up to a maximum of 3 cm thick; otherwise the rolls could stick in the slots.
2. Insert the halved rolls in the slots.
Important: The soft inner side of the rolls must face to the centre strip of the toaster.
20
B
C
42407_DesignToasterAdvancedAutomatik_Manual.qxp 14.05.2007 14:05 Seite 20