Gastroback 42407 Design Toaster Advanced - Manual (Page 6)

First use
Unpack the appliance carefully and check, if there are any parts damaged or missing.
CAUTION: It is important to carefully remove all packing and shipping materials (in the
slots) as well as any price-tags, but do not remove any warning or model labels on the
appliance. Ensure that there are no foreign objects (i.e. packing materials) in the slots before
operating the appliance.
Important: Note: The TOAST/STOPP button only operates when the appliance is
connected to the power supply.
When using the toaster for the first time, you may notice a fine smoke haze, because of
the first heating of some of the components. There is no need for concern. To prevent
smell and taste of your food from being affected, you should heat the appliance on browning
level 7 before placing any cakes and pastries in the slots (see: Operating Your Design
Toaster Advanced Automatic’). If the burnt smell occurs again on later use, clean the
toaster (see: ‘Care and Cleaning’). If the burnt smell persists stubbornly even after
thoroughly cleaning the appliance, return the appliance to an authorised service centre
for examination and repair.
Operating Your Design Toaster Advanced Automatic
WARNING: Always completely unwind the power cord, before connecting the appliance
to the power supply. Ensure, that there are no foreign objects (i.e. shipping material) in
the slots. Do not insert any foreign objects as knives, spoons, or other cooking utensils
in the slots, to avoid risk of fire, electric shock, burns or damage. Always handle with
care, especially, when removing jammed bread slices.
Important: Ensure, that the crumb tray is in place before operating the toaster.
Otherwise crumbs may become charred on the bottom of the toaster and stick to the surfaces.
1. Prepare the toaster for use:
Completely unwind the power cord, place the toaster on an appropriate surface (level,
dry, and heat-resistant) and connect the power plug to an appropriate power outlet (see:
‘Important Safeguards for Electrical Devices’).
2. Using a sharp knife, cut the food (bread or similar cakes and pastries) in slices of
even thickness and appropriate size: max. 13 x 13 cm; 1/2 to 3 cm thick. Try to get
a smooth cut and remove the crumbs.
3. Insert a slice of bread in each slot of the toaster.
4. Turn the browning control to select the desired browning: 1
(light) to 7 (very dark). For the first use, it is recommended to
select a low browning level (example: 1-2; see: ‘Tips for Best
Results’).
18
light
dark
42407_DesignToasterAdvancedAutomatik_Manual.qxp 14.05.2007 14:05 Seite 18