Gastroback 42408 Design Combo Set - Manual (Page 13)

IMPORTANT: The on button only operates when the appliance is connected to the power supply.
When using the toaster for the first time, you may notice a fine smoke haze, because of
the first heating of some of the components. There is no need for concern.
To prevent smell and taste of your food from being affected, you should heat the appli-
ance on browning level 6 before placing any cakes and pastries in the slots. If the burnt
smell occurs again on later use, clean the toaster (see: ‘Care and Cleaning - Toaster’).
If the burnt smell persists stubbornly even after thoroughly cleaning the appliance, return
the appliance to an authorised service centre for examination and repair.
WARNING: Always connect the appliance directly to a separately protected mains
power supply wall socket with protective conductor (earth/ground) connected properly.
Do not use any extension cord or multi socket outlet.
Always place the appliance on a stable, level, dry, heat-resistant and easy accessible
surface. Do not place the appliance near the edge of the table or counter or on an
inclined surface. Ensure, that the appliance will not tilt or wobble.
Operating Your Toaster
WARNING: Always completely unwind the power cord, before connecting the appliance to
the power supply. Ensure, that there are no foreign objects (i.e. shipping material) in the
slots. Do not insert any foreign objects as knives, spoons, or other cooking utensils in the
slots, to avoid risk of fire, electric shock, burns or damage. Always handle with care,
especially, when removing jammed bread slices.
IMPORTANT: Ensure, that the crumb tray is in place before operating the toaster.
Otherwise crumbs may become charred on the bottom of the toaster and stick to the surfaces.
1. Prepare the toaster for use: Completely unwind the power cord, place the toaster on
an appropriate surface (level, dry, and heat-resistant) and connect the power plug to an
appropriate power outlet (see: ‘Important Safeguards for Electrical Devices’).
2. Using a sharp knife, cut the food (bread or similar cakes and pastries) in slices of
even thickness and appropriate size: max. 13 x 13cm; 5 to 22mm thick. Try to get a
smooth cut and remove the crumbs.
3. Insert a slice of bread in each slot of the toaster.
4. Turn the browning control to select the desired browning: 1 (light) to 6
(very dark) (picture A). For the first use, it is recommended to select a light
browning level (example: 2; see: ‘Tips for Best Results’).
5. Press the on button down to lower and centred the bread in the slot.
The cancel button illuminates red (picture B).
Note: The on button only operates when the appliance is connected to
the power supply.
The toasting process is automatically controlled. When the selected browning level is
reached, the toaster switches OFF automatically, and the cancel button eliminates.
31
A
B
42408_DesignComboset_Manual_GermanEnglish.qxp 16.06.2008 10:02 Seite 31