Gastroback 42507 Design Rice Cooker - Manual (Page 8)

5. Open the appliance lid with the opening button, remove the inner pot and fill in the rice.
6. Fill in the required amount of water into the inner pot. Refer to the according level marks on
the inside of the inner pot.
note: You may need for different types of rice and the desired texture, more or less water.
(See: ›Tips for cooking rice‹)
L MAX
1.0
5
0.6
3
0.2
1
CUP
The numbers to the right of the level marks identifies the
number of servings of rice (›Cup‹ scale).
The numbers on the left are in liters.
The liter refers to the amount of rice and does not match
the volume of liquid.
example:
For 3 measuring cups of rice, fill the inner pot up to the
level mark 3 Cup with water.
waRning: Make sure that no foreign objects (eg rice grains) are the heating tank or stick
to the outside of the inner pot. The heating tank and the outside of the inner pot must be clean
and dry. Otherwise this will cause unusual noise during cooking, temperature control will not
work properly and the appliance may overheat. Please keep in mind that the heating plate can
be hot even with the power off when the appliance was recently connected to the power outlet.
7.
Remove any adhering grains and dry the inner pot outside thoroughly. Also make sure that
the top edge of the inner pot and insert the rubber gasket on the lid of the appliance are clean.
Otherwise, the lid does not close properly.
8.
Put the inner pot carefully into the heating tank and close the lid. The lid snaps into place
when it is closed properly.
waRning: Use only the provided power cord. Do not use extension cords or multiple sockets.
Always plug the coupling into the appliance and then insert the power plug into the outlet.
9.
Insert the coupling of the power cord into the power connector on the appliance. Then insert
the power cord into an outlet. The power connector is located below in the gray plastic base
on the right rear of the appliance.
note: Once you connect the appliance to the power outlet, the indicator light for the warm
function turns on and the heating of the appliance begins to operate. Connect the appliance
always only shortly before turning on the power.
10.
Turn the appliance on, by pressing the on/off switch at the front of the appliance until it
clicks into place. The indicator light for the cooking function will light up. Once the rice is done,
the appliance automatically switches to the keep warm mode: The indicator light of the cooking
function turns off and the on/off switch moves to the off position. The rice can now be served.
waRning: When opening the lid during operation or shortly after switching off large
amounts of hot steam can escape suddenly. Open the lid and protect your hands and forearms
possibly with an oven glove or clean towel. After the operation, when opening the lid some
hot condensate could pour from the steam outlet. Upon Opening the lid never put your hand
in the area of the hinge of the appliance. Wipe dry spilled water immediately.
22