Gastroback 40974 Design Hand Blender Advanced - Manual (Page 7)

rate the appliance with broken or crooked tools to avoid injuries trough moving parts and
overheating of the appliance.
• always IMMeDIaTelY unplug the appliance after use and before assem-
bling or dismantling the appliance and its tools and before laying down the
appliance.
• Before operation, always ensure that the appliance is assembled and connected completely
and correctly according to the instructions in this booklet. Do not handle the appliance or any
part of it with violence. Do not let remains of the food dry on the appliance and its tools.
• Do not hold your hands or any foreign objects (e.g. clothes, cooking utensils) on the
appliance, with the appliance connected to the power supply.
Important safeguards for all electrical appliances
• Ensure that the voltage rating of your mains power supply corresponds to the voltage
requirements of the appliance (220/240 V, 50/60 Hz, AC). Always connect the appliance
directly to a mains power supply wall socket with protective conductor (earth) connected
properly. Do not use any multiple electrical adapters. The installation of a residual current
safety switch with a maximum rated residual operating current of 30 mA in the supplying
electrical circuit is strongly recommended. If in doubt, contact your local electrician for
further information.
• In various foreign countries, the specifications for power supplies are subject to incom-
patible norms. Therefore it is possible that power supplies in foreign countries do not meat
the requirements for safe operation of the appliance. Thus, before operating the appliance
abroad, ensure that safe operation is possible.
• Do not leave the appliance unattended while connected to the power supply. Always
release the ON- button and IMMeDIaTelY unplug the appliance after operation and if it
is not in use and before laying it down, cleaning and/or assembling or dismantling. Always
grasp the plug to disconnect the appliance from the power outlet.
• The appliance is only suited for household use only.
• Always handle the power cord with care. Do not pull or strain the power cord. The
power cord may never be knotted or squeezed. Do not let the power cord hang over the
edge of the table or counter. Take care not to entangle in the power cord.
• Do not touch the appliance with wet hands to avoid risk of electric shock. Do not touch
the appliance, when it is damp or wet and connected to the mains power supply. In this
case, immediately unplug the appliance.
Moving parts – risks of injury to persons
• The blades are extremely sharp. Do not touch the blades with your hands or any other
objects (hair, clothes, brushes, cooking utensils), when the appliance is connected to the
power supply. Always handle the tools of the appliance with care and without violence
to avoid injury to persons and damage. Always ensure, that the appliance is assembled
correctly, before connecting the appliance to the mains power supply.
• Before switching on the appliance, always immerse the blender blade or the in the food,
to avoid excessive splashing. Do not immerse the processing tool too deep (max. half height
of the processing tool).
23