Gastroback 40974 Design Hand Blender Advanced User Manual

Page 10

Using the stainless steel whisk

Use the whisk only for whipping cream, beating egg whites and mixing
sponges and Ready-mix desserts.

WarnIng:

Always release the ON-button, wait until the motor stops

and unplug the appliance before lifting the whisk tool out of the food, laying

down the appliance or assembling/dismantling the whisk tool.
Before connecting the appliance to the mains power supply, always ensure

that the appliance is assembled correctly, according to the following instruc-

tions. Do not touch the whisk tool with your hands or any objects (i.e. hair,

clothes, tissue), when it is mounted and the appliance is connected to the

mains power supply. Before pressing the ON-button, immerse the processing

tool in the food (up to the half of its height at most), to avoid excessive splas-

hing and dripping of liquids onto the appliance.
1. Prepare your food and fill it into a sufficiently large and high-sided vessel

(like the vessel provided).

WarnIng:

The provided vessel is not heat resistant. The max. tempera-

ture is 70 degrees. Let the boiling food cool down a little bit before starting

to blend.
2.

Ensure, that the appliance is unplugged.

3. Place the shaft of the stainless steel whisk into the whisk holder (see picture

D). Place the whisk holder onto the motor block and press together until it

snaps into place (see picture E). There may be no gap between the motor

housing and the stainless steel blender. The blender shaft must be locked

firmly and may not wobble (see picture F).
4. Immerse the stainless steel whisk into the food. Choose the speed with the

variable control switch. It is to be expected, that the food will splash during

operation. When processing hot meals, do not hold the appliance in the

rising steam to avoid condensation on the motor housing. Immediately wipe

off condensate on the motor housing. The lower part of the stainless steel

whisk should be always covered with food to avoid splashing.
5. Connect the power plug to a suitable wall power outlet.
6. Hold on to the vessel with one hand and press the ON-button to start the

motor. Slowly circle the appliance during operation. Hold the appliance upright

in the mixing vessel during operation to avoid splashing (see picture G-).

caUTIOn: Do not use the appliance with the stainless steel whisk in conti-

nuous operation for more than 2 minutes to avoid overheating. If processing

large quantities of food, regularly interrupt the operation and unplug the

appliance for a few minutes, allow the motor to cool down.
7. Blend your food to the desired quality but at least after 2 minutes of con-

tinuous operation release the ON-button.
8. Wait until the motor stops, before you lift the whisk out of the food.
9. Always unplug the appliance immediately after operation. Lay down the

appliance on a stable, dry and clean surface, where it cannot fall.