Care and cleaning – Gastroback 40974 Design Hand Blender Advanced User Manual

Page 12

caUTIOn: Do not use the appliance with the chopper attachment in conti-

nuous operation for more than 1 minute to avoid overheating. If processing

large quantities of food, regularly interrupt the operation and unplug the

appliance for a few minutes, allow the motor to cool down.
8. Chop your food to the desired quality, but at least after 1 minute of con-

tinuous operation release the ON-button.
9. Wait until the motor stops. Always unplug the appliance immediately after

operation or before assembling/disassembling the tools. By pressing both

release-buttons remove the motor block from the chopper attachment and

place the motor block on a suitable surface, where it cannot fall.

WarnIng:

Always release the ON-button, wait until the motor stops

completely and unplug the appliance before assembling or dismantling the

tools.
10. Clean the appliance in accordance to the instructions in chapter ›Care

and cleaning‹. Do not leave any food to dry on the surface of the appli-

ance.

Processing guide for the chopper attachment:

food

max. amount

max. operation

meat

250 g

8 sec

herbs

50 g

8 sec

nuts

100 g

8 sec

cheese

100 g

5 sec

bread

80 g

5 sec

onions

150 g

8 sec

biscuits

150 g

6 sec

soft fruit

200 g

6 sec

care and cleaning

WarnIng:

To avoid injury to persons and damage, always release the ON-button, wait

for the motor to stop completely and unplug the appliance immediately after operation and

before laying down, dismantling or cleaning the appliance. With the appliance connected

to the power supply, do not touch the assembled tool with your hands or any objects.

note:

The blades are very sharp. Do not touch the blades. Always handle the tools by

the shaft.
DO NOT clean the motor block, the stainless steel blender, the whisk hol-

der, the chopper lid or the power cord in an automatic dishwasher. Do not

immerse these parts in any liquids or spill any liquids on it. always wipe

off spilled liquids immediately. Do not pour or drip any liquids on the motor

housing or power cord. Do not place the appliance on wet or damp sur-

faces. When liquids are spilled on the motor housing, immediately unplug

the appliance and dry the motor housing to avoid risk of electric shock or