Gastroback 42601 Design Coffee Grinder Basic - Manual (Page 7)

21
• Do not leave the appliance unattended while connected to the power
supply. Always immediately unplug the appliance after operation and if it is not in
use (even for a short break) and before cleaning and/or assembling or disassembling.
Always grasp the plug to disconnect the appliance from the power outlet.
• Always handle the power cord with care. Do not pull or strain the power cord. The
power cord may never be knotted or squeezed. Always unwind the cord fully before
use. Do not let the power cord hang over the edge of the table or counter. Take care
not to entangle in the power cord. Do not touch the appliance, with wet hands, to
avoid risk of electric shock. Do not touch the appliance, if it is damp or touching a wet
surface, while connected to the mains power supply. In this case, immediately unplug
the appliance and dry the appliance (see ›Care and Cleaning‹).
• Do not immerse the motor or power cord in any liquids or spill any liquids on it or
place the motor on wet surfaces. Never let any liquids run into the motor housing or
underneath it to avoid electric shock. When liquids are spilled on the motor housing,
immediately unplug the appliance and dry the motor housing to avoid risk of electric
shock or fire. Do not
attempt to operate the appliance, when liquids are on or in the
motor housing.
TeChnICaL speCIfICaTIOns
Model: Art. No. 42601 Design Coffee Grinder Basic
Power supply: 230 - 240 V, 50 Hz
Power consumption: 250 - 270 W
Length of power cord: ca. 62 cm
Weight: ca. 1.16 kg
Dimensions: ca. 102 x 120 x 218 mm (width x depth x height)
Certification: