Gastroback 42601 Design Coffee Grinder Basic - Manual (Page 11)

25
Tips for making espresso
• The coffee must be finely ground, but not too fine (the correct grind should look gritty,
like salt or sand).
• If the grind is too fine, the water, when brewing, will not flow through the coffee even
under pressure (this grind looks like powder and feels like flour when rubbed between
fingers).
• If the grind is too coarse, the water, when brewing, will flow too fast through the
coffee, preventing a full flavoured extraction.
ImpOrTanT: Do not overload the motor with food that is oversized or too hard. Turn
the appliance off as soon as the motor stalls or stucks to avoid overheating of the motor.
Care anD CLeanIng
warnIng: To avoid injury to persons and damage, always unplug the appliance
and wait for the motor to stop completely, immediately after operation and before
assembling /disassembling or cleaning the appliance.
aTTenTIOn: Do not use abrasive cleaners, cleaning pads, corrosive chemicals (disin-
fectants, bleach) or any sharp or hard objects (i.e. metal scouring pads) for cleaning,
for this could damage the surfaces. Always handle the entire appliance with care and
without violence.
1.
Unplug the appliance from the power outlet before cleaning and take the lid off the
grinding bowl turning it counterclockwise. Lift the lid straight up.
2.
Remove grinding bowl by turning it counterclockwise, then lift straight up. You will
hear a clicking sound when the grinding bowl is unlocked.
3.
The lid and removable grinding bowl should be washed in warm soapy water, rinsed
and dried thoroughly.
4.
Polish with a soft, dry cloth. Do not use abrasives. When the units are dry assemble
the appliance for storage or usage.
aTTenTIOn: Do not place any parts of the appliance in an automatic dishwasher.
Cleaning the motor housing
warnIng:
Do not place the appliance or any parts of it in an automatic dish-
washer or pour boiling water over it. Do not immerse the motor or power cord in any
liquids or spill any liquids on it or place the motor on wet surfaces. Always wipe off
spilled liquids immediately. When liquids are spilled on the motor housing, immediately
unplug the appliance and dry the motor housing to avoid risk of electric shock or fire.
Do not attempt to operate the appliance, when liquids are on or in the motor housing.
1.
Always unplug the appliance from the power outlet before you start cleaning the
motor housing.