FEISOL CT-3441T Tripod - Manual (Page 4)

© FEISOL INC, USA
WWW.FEISOL.NET
Page 4 of 4
F. Spike (optional) Installation
Remove the rubber caps on the end of the legs by twisting and working them forward – they
fit snugly in order to prevent them from coming off accidentally. After they are removed, a
thread is exposed at the tip of the leg, into which a long or short spike can be screwed (for
use on scratch- sensitive surfaces, remove spike and replace rubber cap).
G. Short Center Column (optional) Installation
For exchanging Center Columns on the tripod, unscrew the plate at the bottom of the
Center Column by turning it counterclockwise (see picture). Next, unlock the twistlock of the
Center Column by turning it one turn in counterclockwise direction, and pull the Center
Column out of its mount. After unscrewing the bottom plate of the Short Column to be
installed, slide the Column into the mount and replace the bottom plate.
Please note that damage to your tripod’s Carbon Tubes or Aluminum parts can occur when
they dropped, squeezed, overloaded, or forced downward (eg. into sand dunes or
snowbanks). Please exercise care to avoid such conditions.