FEISOL CT-3441T Tripod - Manual (Page 2)

© FEISOL INC, USA
WWW.FEISOL.NET
Page 2 of 4
B. Leg Tension Adjustment
Insert the two hexagonal wrenches (included) into the two screws at the base of the leg
(see picture) and tighten or loosen them to the desired friction, by turning the wrenches in
opposite directions.
C. Leg Extension
In order to extend a leg section, turn the twist-lock approximately one half turn in
counterclockwise direction. Note: If the twistlock is turned too far, the leg section may fall
out and compression rings may become lost or damaged.
To firmly lock a leg section into place, turn the twist-lock approximately one half turn in
clockwise direction. Please do not over-tighten.