FBT QUBE PA User Manual
Page 3

The PA140 provides 500W of power per channel using a 4
ohm speaker system (350W per channel with 8 ohm) and is
the ideal amplifier for QUBE Q112, Q115, QS112 and
QS115 speakers. The PA140 can also be connected to a
controller module.
PA300 is a 1500W per channel power amplifier designed
for all those applications where reliability and sound quality
are extremely important. It includes self-resetting
protective circuitry to prevent any damage, with LEDs
indicating the status of each channel. Other characteristics
include a ground lift and selector of bridge mode. PA300 is
ideal to be used combined with Q115,QS115, QS118 , BRH
and TRS QUBE speaker systems. The versatility of the
power amplifier allows the use of controller module to
process the signal, optimising the overall performance of
the speakers and protecting them at the same time from
possible damages.
The PA360 is a 1800W per channel power amplifier
designed for all those applications where reliability and
sound quality are for primary importance. It includes self-
resetting protective circuitry to safe-guard against damage,
with LEDs indicating the status of each channel. Other
characteristics include a ground lift switch and selector for
simple setting of stereo bridge mode. The PA360 is ideal for
the use with QUBE QSA210 LINE ARRAY speaker, QS218
, BRK and RUT. The versatility of the system allows the use
of a controller module to process the signal, optimising the
overall performance of the speakers and protecting them at
the same from possible damages.
POWER AMPLIFIERS
ANALOG CONTROLLERS
DIGITAL CONTROLLERS
See page 8.
See page 8.
See page 8.
See page 10.