Evolution Engines EVOE20GX - Manual (Page 5)

EN
5
Installing the Engine
1. Secure the engine mount on the airplane
firewall. Tighten the engine mount screws
in the firewall.
2. Install the engine on the engine mount
according to the airplane manufacturer’s
instructions.
WARNING: Tighten all engine
mounting screws before each flight. If
you do not tighten the engine
mounting screws, the screws may
vibrate loose and cause the engine to
separate from the fuselage.
Included Content
ENGINE
• Muffler (EVOG20601)
• Muffler Screws & Gasket (EVO110E100A)
• Spark Plug (EVOG10350)
• Evolution/Spektrum
™ Telemetry RPM
adapter cable (EVOA107)
• Med Gas Fuel Tubing (EVOA104)
• In-Line Fuel Filter (EVOA105)
• In-tank Felt Filter/Clunk (EVOA106)
OPTIONAL ITEMS
• Tachometer (HAN156)
• Propeller 15 x 6 (EVO15060) for break-in;
16 x 6 (EVO16060) for normal flight
• Optical Electronic Ignition Kill Switch
(EVOA100)
• Evolution Synthetic 2-Cycle Oil, (EVOX1001Q)
• Ultra Fuel Pump (HAN155)
Muffler
High-Speed
Needle
Spark Plug
Fuel Nipple
Low-Speed
Needle
Throttle
Arm