ETS-Lindgren HI-4456 Isotropic Electric Field Probe (Archived) - Manual (Page 17)

Page — 12 HI n 4456 Manual
details regarding the observed symptom(s),
and whether the problem is constant or
intermittent in nature. If you have talked
previously to Holaday Customer Service about
the problem, provide the date(s), the name of
the service representative you spoke with, and
the nature of the conversation. Include the
serial number of the item being returned.
Step 2. The sensor and electronics housing are
engineered to operate as a unit and MUST be
returned together. Carefully package the
probe assembly in the carrying case. Use the
original boxes and packing materials, if
possible. If not, use the Parts List in Table
5 n 1 to order new boxes and foam packing
from Holaday Industries, Inc.
NOTE
If your probe is calibrated in accordance with MIL-Std-
45662A, it is greatly to your benefit to retain the original
shipping box and packing materials. One of the criteria
for certifying a calibration to MIL standards requires
Holaday Industries to always ship equipment in the
specified packaging. When a MIL Standard instrument is
sent to Holaday in other packaging, we must replace it
with the specified packaging materials for return
shipment. YOU WILL BE BILLED FOR THE NEW
PACKAGING.
If the probe is under warranty, refer to the Limited
Warranty at the front of this manual for additional
information about your return.
Periodic/Preventive Maintenance
The HI n 4456 probe assembly (sensor and electronics
Archived 4/2/10