ETS-Lindgren FP2083 Isotropic Electric Field Probes (Archived) - Manual (Page 29)

Isotropic Electric Field Probes
HI-4453/FP5083/FP4083/FP2083
© ETS-LINDGREN L.P. – June 2005
Rev. F, P# H-600064 29
6. APPENDIX A: ERROR CODES
PROBE ERROR OUTPUT
If an error occurs, the probe will respond with one of the
following strings. These strings begin with a colon and end with
a carriage return.
E01
Communication error (e.g., overflow).
E02 Buffer full error. Too many characters
contained between the Start
Character/Carriage Return sequence.
E03 The received command is not valid.
E04 The received parameter is not valid.
E05 Hardware error (e.g., EEPROM failure).
E06 Parity error.
Archived 4/2/10