ETS-Lindgren HI-3603 VLF Survey Meter User Manual

Page 44

HI-3603 VDT/VLF Survey Meter

Revision E, Part # H-600042

Step 2. Briefly describe the problem in writing. Give details
regarding the observed symptom(s) or error codes, and whether
the problem is constant or intermittent in nature. Please include
the date(s), the service representative you spoke with, and the
nature of the conversation. Include the serial number of the item
being returned.

Step 3. Package the system or component carefully. Use the
original packing boxes and materials, if possible.

If the probe is under warranty, refer to the Limited Warranty
section of this manual for additional information about your
return.

PERIODIC/PREVENTIVE MAINTENANCE

The meter requires an annual calibration to verify that they are
performing within specifications. ETS-Lindgren service
personnel may perform this calibration at the factory. Return
your probe(s), using the original packing materials (if possible),
to:

ETS-Lindgren

Attn. Service Department

1301 Arrow Point Drive

Cedar Park, Texas, USA 78613