ETS-Lindgren 2188 Turntable - Manual (Page 34)

Model 2188 Turntable
©ETS-Lindgren—January, 2006
Rev. B—P#399771
34
7.3. Annual Maintenance
These maintenance items should occur every twelve months after
the turntable is put into service.
• Lubricate the main bearing race. Use a grease gun with a good
quality bearing grease. The grease fittings are located inside
the race, 90 degrees apart, underneath the top. Three
discharges from the grease gun in each fitting are adequate.
Using synthetic grease, grease all casters. Mobil 1 synthetic is
recommended; do not use lithium grease.
• Lubricate the chain and sprocket of the chain drive. Apply good
quality grease to the chain and sprocket; do not use lithium
grease.