ETS-Lindgren 2188 Turntable - Manual (Page 11)

Model 2188 Turntable
©ETS-Lindgren—January, 2006
Rev. B—P#399771
11
2. Getting Started
2.1. Unpacking and Acceptance
Step 1. Upon delivery of your order, inspect the shipping
container(s) for evidence of damage. Record any damage on the
delivery receipt before signing. In case of concealed damage or
loss, retain the packing materials for inspection by the carrier.
Step 2. Once all of the materials are removed from the container
by a qualified installer, check all materials against the packing list to
verify that the equipment received matches what was ordered. If
you find any discrepancies, note them and call ETS-Lindgren
Customer Service (+1.512.531.6400) for further instructions.
Ensure that you are satisfied with the contents of your order and
the condition of your equipment prior to installation.
Pre-planning is essential for a successful installation. Be sure to
discuss your requirements with your sales representative and
request dimensional drawings prior to construction of your site.
2.2. Electrical Specifications
Nominal AC Voltage 230 VAC
Input Frequency 50/60 Hz
Phase Single Phase
AMP 2.0
RPM 0.5/2.0 variable
Table 1: Electrical Specifications