Clarion DXZ665MP - Manual (Page 21)

280-8331-00
DXZ665MP
21
English
Operations Common to
Each Mode
To change display setting
1. Press and hold the [D] button for 1
second or longer to switch to the
adjustment selection display.
2. Press the [ å , ∂ ] lever upward or
downward to select the “item name”.
“CLOCK” ↔ “BGV” ↔ “S-A PTN” ↔
“S-A SENS” ↔ “S-A SPEED” ↔
“POWER MSG” ↔ “SCRN SVR” ↔
“MSG INPUT” ↔ “AUTO SCRL” ↔
“DIMMER”
3. Turn the [ROTARY] knob to select the
“desired setting value”.
∗ IIn the case of item names appearing with
the “PUSH ENT” suffix, after the item name,
the [
] button must be pressed to display
the setting value.
∗ After completing settings, press the [D]
button to return to the previous mode.
● Setting the clock
2-1. Select “ CLOCK ”.
3-1. Press the [ ] button.
3-2. Press the [ å , ∂ ] lever upward or
downward to select the hour or the minute.
3-3. Turn the [ROTARY] knob to set the correct
time.
∗ The clock is displayed in 12-hour format.
3-4. Press the [ ] button to store the time into
memory.
Note:
• You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the car’s
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
● Setting the background vision
This function allows you to change the
background vision in the display.
∗ The factory default setting is “SCAN”.
2-1. Select “ BGV”.
3-1. Turn the [ROTARY] knob to select the
setting.
Each time you turn the [ROTARY] knob,
the setting changes in the following order:
“SCAN” ↔ “MOVIE” ↔ “WALL 1” ↔
“WALL 2” ↔ “WALL 3” ↔ “WALL 4” ↔
“WALL 5” ↔ “OFF”
Other various play functions
● Scan play
This function allows you to locate and play the first
10 seconds of all the tracks recorded on a disc.
1. Press the [SCN] button to perform scan play.
“SCAN” appears in the display.
∗ Scan play starts from the next track after the
track currently being played.
● Folder scan play
This function allows you to locate and play the
first 10 seconds of the first track of all the
folders on an MP3/WMA disc.
1. Press and hold the [SCN] button for 1
second or longer to perform folder scan play.
“F.SCAN” appears in the display.
∗ Folder scan play starts from the next track
after the track currently being played.
● Repeat play
This function allows you to play the current track
repeatedly.
1. Press the [RPT] button to perform repeat play.
“RPT ” appears in the display.
● Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
1. Press and hold the [RPT] button for 1 second
or longer to perform folder repeat play.
“F.RPT” appears in the display.
● Random play
This function allows you to play all tracks
recorded on a disc in a random order.
1. Press the [RDM] button to perform random
play.
“RDM” appears in the display.
● Folder random play
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
1. Press and hold the [RDM] button for 1
second or longer to perform folder random
play.
“F.RDM” appears in the display.
● To cancel play
1. Press the operating button previously
selected.
CD/MP3/WMA Operations