beautypg.com

15 english, Setting the z-enhancer, Adjusting the tone – Clarion DXZ665MP User Manual

Page 15: Adjusting the bass, Adjusting the treble, Adjusting the balance, Adjusting the fader, Basic operations

background image

280-8331-00

DXZ665MP

15

English

For details, refer to the subsection “Turning the
screen saver function on or off
” in section
Operations Common to Each Mode.”

When the power is turned off

1. Each time you press the [D] button, the clock

time appears or disappears in the display.

Setting the Z-Enhancer

This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.

The factory default setting is “OFF”.

Each time you press the [Z] button, the tone
effect changes in the following order:

“OFF”

“BASS BOOST”

“IMPACT”

“EXCITE”

“OFF” ...

BASS BOOST : bass emphasized

IMPACT

: bass and treble emphasized

EXCITE

: bass and treble emphasized

mid deemphasized

OFF

: no sound effect

Adjusting the tone

Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:

When “BASS BOOST” is set

“BALANCE 0”

“FADER 0”

Last

function mode.

When “IMPACT” is set

“BALANCE 0”

“FADER 0”

Last

function mode.

When “EXCITE” is set

“BALANCE 0”

“FADER 0”

Last

function mode.

When “OFF” is set

“BASS 0”

“TREB 0”

“BALANCE 0”

“FADER 0”

“Last function mode.

Adjusting the bass

The bass gain can be adjusted as follows.

1. Press the [A-M] button and select “BASS 0”.

2. Turn the [ROTARY] knob to adjust the gain,

–6 to 7 (The factory default setting is “0”).

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the treble

The treble gain can be adjusted as follows.

1. Press the [A-M] button and select “TREB 0”.

2. Turn the [ROTARY] knob to adjust the gain,

–6 to 6 (The factory default setting is “0”).

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the balance

1. Press the [A-M] button and select

BALANCE 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left speaker.

The factory default setting is “0”. (Adjustment
range: L13 to R13)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Adjusting the fader

1. Press the [A-M] button and select “FADER 0”.

2. Turning the [ROTARY] knob clockwise

emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.

The factory default setting is “0”. (Adjustment
range: F12 to R12)

3. When the adjustment is complete, press the

[A-M] button several times until the function
mode is reached.

Note:
• During A-M adjustment mode, if no operation is

performed for more than 7 seconds, this mode
can be cancelled and return to previous mode.

Basic Operations