ETS-Lindgren 3810-2 LISN - Manual (Page 7)

1.0 Introduction
The ETS-Lindgren
Model 3810/2 Line
Impedance Stabilization
Network (LISN) is a
two-channel low pass filter
network designed to isolate
the Equipment Under Test
from an external power
source while steering any
radio frequency signals
from the power line to a
50-ohm port.
Model 3810/2 Front View
The conducted emissions measurements may be made in accordance with
regulatory compliance standards
The Model 3810/2 was designed and tested in accordance with
IEC Publication 1010, Safety Requirements for Electronic Measuring
Apparatus, and is supplied in a safe condition.
ETS-Lindgren Product Information Bulletin
See the ETS-Lindgren Product Information Bulletin included with your shipment
for the following:
• Warranty information
• Safety, regulatory, and other product marking information
• Steps to receive your shipment
• Steps to return a component for service
• ETS-Lindgren calibration service
• ETS-Lindgren contact information
Introduction | 7