ETS-Lindgren 3810-2 LISN - Manual (Page 19)

5.0 Data
Graphs of the calibration data for each measurement port of the Model 3810/2
Line Impedance Stabilization Network (LISN) are included with the unit. The
graphs provide individual plots of both impedance and insertion loss data.
Impedance is plotted in a semi-log format where frequency is displayed on the
horizontal from 9 kHz to 30 MHz. The vertical has a range of 0 ohms to
100 ohms and represents the measured impedance of the unit. The insertion loss
is also plotted with frequency on the horizontal from 9 kHz to 30 MHz. The
vertical of the graph has a range of -9 dB to 1 dB and represents the measured
insertion loss of the Model 3810/2.
A Certificate of Calibration Conformance is provided with each Model 3810/2.
Data | 19